SS-2 Switch Sets - LynTec, Inc.

One Touch Remote Control — Compatible With All LynTec Sequencers
Requires 4 conductors (half of a CAT 5 cable — up to a mile)




Standard SS-2 Switch Set (One pair included with each LynTec sequencer cabinet.) The SS-2 Switch Set consists of two momentary, SPDT push-button switches which mount in 5/8" round holes in panels up to 1/4" thick. The ON switch is illuminated. The OFF switch is not illuminated. Optional SS-32 Switch Set Optional DPDT ON/OFF switch pair provide simultaneous control of other equipment. Identical front appearance to SS-2.

	Optional KS-2L Switch with Label Lock switch for your panel mounting. Mounts in 3/4" round hole. SPDT Tumbler lock position label provided.



[ Wiring & Mechanical Layout ] [ Back to PDS-8EK home page ] [ Back to MSLC home page ] [ Back to MSP home page ]


	SS-2PL (SPDT) or SS-32PL (DPDT) Locking Switch Set Option




		Custom film legends you can print on your own printer... The picture to the right illustrates only a few of our custom SS-2 and SS-32 Switch Set legends that you can print on overhead transparency film or translucent parchment paper. Get the entire collection by downloading document 139-0309_CSLF-1_Film.pdf.


	■ Switch set and key lock switch are mounted on a single-gang stainless steel wall plate. ■ Switches may be field rotated for vertical or horizontal orientation at the installer's option. ■ Key may be removed in both locked and unlocked positions. ■ Tumbler lock label indicates lock switch position. ■ All keys are keyed alike. Key blanks are standard stock items at most retail key kiosks for easy field duplication.

8401 Melrose
Lenexa, Kansas 66214-1647
Toll Free Voice: 1-800-724-4047 and Toll Free Fax: 1-888-722-4157
International Voice: 913-529-2233 • Fax: 913-529-4157