Lyntec > Products > AC Power Control > DMX Home > Lighting Control Load Center_LCLC Series

LCLC Series Load Centers

Circuit protection and DMX control in one panel.

Individual Circuit Control via DMX512 protocol

The LCLC series of DMX controlled Load Center circuit breaker panels offer a labor-saving one-panel alternative to DMX relay panels.  The economical Load Center panels require the least wall space for tight locations and are available in 26 and 41 circuit sizes of 3 phase, 4 wire 208Y/120Vac.

Load Center's are traditional residential panels and are consequently best suited for smaller circuit breaker counts or for applications with limited wall space. The LCLC is more economical than the bigger panelboards, and is a great value for all of the features offered!

  • Saves Space
  • Saves redundant installation and hardware costs!
  • Energy efficient - NO holding current or heat sinks required to maintain state - Runs cool, lasts long!
  • Automatic load shedding and brownout protection in every panel.
  • Emergency override function standard on every panel.
 
 

Short Cabinet:

LCLC 326 (for main breakers <100A), LCLC 329 (Main Lugs Only [MLO])

Tall Cabinet:

LCLC 338 (for main breakers <100A), LCLC 341 (150A, 200A, 225A and MLO available)

Specifiying in 5 easy steps

  1. Choose the control method MS=Sequencing, LC=DMX512, and SC=RS-232
  2. Choose the cabinet style: LC for load center.
  3. Choose three phase (3) or single phase (1)
  4. Choose the number of circuits: 26 or 41 Panelboards are only available in 41 circuits.
  5. Choose the maximum number of controlled circuits: 12, 24, 36, or 48 for MS and 10,20, 30, 40,or 50 for LC and SC

 

EX: LCLC 341-30 = a 3 phase DMX controlled load center with 41 circuits (30 max controlled)

Comprehensive Specifier's Guide  adobe-logo.jpg

LC-10 Series

Each motorized breaker is DMX512 addressable via a simple set of jumpers on the LynTec control board. Once the DMX address starting point is set by inserting the jumper, each motorized breaker has the next sequential address assigned to it (one address per breaker), the DMX operator can then program the breaker addresses for individual control. The LynTec control boards only use as many addresses as there are motorized breakers connected to it, this saves valuable DMX addresses for other equipment. DMX commands for each breaker are on, off or no change.

Move your mouse over the red dots Red-Dot.gif to see all of the great features.

You must install Adobe Flash to view this content.

MB Series Motorized Breakers

Available in 15, 20 and 30 Amps, one, two and three poles.

For complete mototized breaker details click here.

Brochure for all LCLC Load Centers

Architects and Engineers Specs for all LCLC Panels - PDF or Word

Three Phase:

LCLC 326:   Panel Planner, Design and Specification, Submittals

LCLC 329:   Panel Planner, Design and Specification, Submittals

LCLC 338:   Panel Planner, Design and Specification, Submittals

LCLC 341:   Panel Planner, Design and Specification, Submittals

Full Catalog

Mouse over each thumbnail for a title and brief description of each video.

Click thumbnail to view.

  • Power Control Simplified LynTec Panel Basics: Why a controllable breaker panel? Square D motorized branch circuit breakers plus LynTec customized control electronics provides the most elegant electrical power control platform.
    Power Control Simplified
  • Building a Motorized Breaker Panel System Part Number In this video we describe how to create a system part number for a LynTec motorized circuit breaker panel. We cover panel, control board and motorized breaker options.
    Building a Motorized Breaker Panel System Part Number
  • Controllable Motorized Circuit Breaker Tutorial LynTec uses Square D manufactured remotely operated motorized branch circuit breakers to build custom AC power control systems for the pro A/V industry.
    Controllable Motorized Circuit Breaker Tutorial