Lyntec > Products > AC Power Control > Remote Power Controller_RPC

RPC Series Panelboards

Networkable AC power control.

RPC 341

Remote Setup, Control, and Monitoring in One Panel

The newest addition to the LynTec product line is the RPC (Remote Power Controller) Series Panel. The RPC combines all the features you've come to expect from LynTec panels with new web enabled control and monitoring capabilities.

Based on the G3 PowerlinkTM platform by Square D, the RPC uses the latest remotely operated breakers and can control up to 4 full panels with a single controller.

In addition, the RPC's expanded interface options (TCP/IP, RS-232, RS-485, DMX512A) allow users to monitor and control the system from any remote location.

  • New programmable software platform can be customized for optimal power management.
  • The LynTec controller increases interface options, simplifies programming, and adds remote status monitoring
  • Plug-on control bus strips simplify wiring and installation.
  • 200% Neutrals standard
  • 225A Main Standard
  • Easy setup for sequential system control of audio systems or indivdual circuit control of non-dimmed lighting circuits.
  • The LynTec power supply improves system performance and provides for automatic load shedding and brownout protection.
  • The LynTec isolated technical ground bar reduces electrical noise and improves sound system performance.
 
 

Short Cabinet:

Master Panel:

RPC 329 (100A main standard, max main size 125A, MLO available upon request)

Slave Panels:

RPS 330

RPS 330 ITG (Isolated Technical Ground)

Tall Cabinet:

Master Panels:

RPC 338 (for main breakers <100A), RPC 341 (125A, 150A, 175A, 200A, 225A and MLO available)

RPC 341 M400 (400A main breaker)

Slave Panels:

RPS 339 (for main breakers <100A), RPS 342 (125A, 150A, 175A, 200A, 225A and MLO available)

RPS 342 M400 (400A main breaker)

RPS 339 ITG (for main breakers <100A), RPS 342 ITG (125A, 150A, 175A, 200A, 225A and MLO available) (includes isolated technical ground)

RPS 342 ITG M400 (400A main breaker) (includes isolated technical ground)

For powered slave panels add "P" suffix.

RPC 341 & RPC 329

Networkable AC Power Control

RPC Controller Tour

LynTec's RPC controller allows you to both control and monitor you breakers remotely.

Move your mouse over the red dots Red-Dot.gif below to see controller features.

You must install Adobe Flash to view this content.

Control Options

Click here to tour our interactive virtual RPC GUI.

LynTec is now an AMX Device Discovery partner.

There's an app for that.  Check out our new RPC app for the iPhone and iPad! Also available for Android devices.

DMX

RS-232

TCP/IP

The RPC can work with any external controller that uses DMX, TCP/IP or RS-232 control protocols.

Square D's Powerlink Breaker


  • Robust construction and highly effective trip mechanism provide unequaled remote operation capability in terms of electrical ratings and mechanical life (rated for 200,000 cycles).
  • Motorized mechanism can open and close the contacts when the circuit breaker handle is in the ON position.
  • Contacts cannot be closed remotely when the handle is in the OFF position or the circuit breaker is tripped.
  • Manual override selector located on the front of the circuit breaker– necessary when emergency power control is required.
  • Contact status indication – this superior capability assures the true status of the branch circuit is reflected back to the remote location.
  • Available in 15, 20, and 30 A, one, two and three poles.

RPC Brochure

RPC Technical and Submittal Info

RPC Operations Manual

RPC A&E Specs - PDF or Word

QuickStart Guides:

Multi-Panel Setup Quickstart Guide

RPC Quickstart Guide

Contact Closure Quickstart Guide

Datasheet for optional SurgeX Sidecar

 

Full Catalog


Mouse over each thumbnail for a title and brief description of each video.

Click thumbnail to view.

  • RPC Setup (1/4) Hardware Brief overview of basic RPC panel hardware and set-up. Includes hardware tour, low voltage wiring, powering and connecting to your control network (TCP/IP, RS-232, DMX512).
    RPC Setup (1/4) Hardware
  • RPC Setup (2/4) Slave Panels Brief overview of connecting slave panels and matching the GUI to your physical configuration. Includes hardware involved, wiring instruction and software scan-for-breakers command.
    RPC Setup (2/4) Slave Panels
  • RPC Setup (3/4) Software Basics Overview of setting up your RPC software. Includes zone sequence and group setup of breakers, addressing circuits, monitoring and control, and brief description of available options/tools.
    RPC Setup (3/4) Software Basics
  • RPC Setup (4/4) Software Features Overview of advanced software features and setup. Includes Contact Closure, Emergency Shutoff, Brownout (under voltage) Protection setup instructions.
    RPC Setup (4/4) Software Features
  • Integrated Power Center - Single Cabinet Solution See the IPC at a glance - an elegant way to package a very common panelboard(s) + transformer design.
    Integrated Power Center - Single Cabinet Solution
  • Power Control Simplified LynTec Panel Basics: Why a controllable breaker panel? Square D motorized branch circuit breakers plus LynTec customized control electronics provides the most elegant electrical power control platform.
    Power Control Simplified
  • iPhone App Info iPhone App for LynTec RPC Panels
    iPhone App Info
  • LynTec RPC Networkable AC Power Control System The newest line of controllable AC power panels by LynTec permits a user to remotely monitor, program and control their branch circuit breaker panel. A built in web server allows simple interaction with the panel. A must have for installed audio, video and lighting systems.
    LynTec RPC Networkable AC Power Control System
  • Controllable Motorized Circuit Breaker Tutorial LynTec uses Square D manufactured remotely operated motorized branch circuit breakers to build custom AC power control systems for the pro A/V industry.
    Controllable Motorized Circuit Breaker Tutorial